coal briquette briquetting
Briquette is a coal product with a certain strength, size and shape, which is based on pulverized coal as the main raw material, according to the specific ratio, mechanical strength, and shape and size of the machine.
Clean coal ball press can be used to suppress pulverized coal, iron powder, coking coal, aluminum powder, iron filings, iron oxide scale, carbon powder, carbon powder, slag, gypsum, tailings, sludge, kaolin, activated carbon, coke and so on. Powder, powder, waste, waste
The briquette ball press must have a more balanced base. Pay attention to the level of correction and level the gap. The conveyor should also correspond to the height and level of the conveyor. After the installation, strictly check whether the components are firmly connected. Whether there is any debris on the machine, add the lubricant in the reducer and the gearbox, and make sure that the components are correct before testing. When the test machine is inspected, whether it is reversed or not, the direction is correct, and the air is running for 30 minutes to see if any parts have abnormal noise or heat. If problems are found, solve them in time. After all normal, prepare 300 kg of dry material (no pulverized coal, fine sand or fireproof) Material), dry grinding and polishing, about five times or so, can be officially produced. Please note: the water content has a great influence on the pressure and demoulding of the ball. It must be mastered. It is best to dry it first and then wet it.